GT2025110603
Features:
 
The gear is the element of a machine that transmits and transforms motion.
A gear comprises at least one drive, an output and a frame
Gear drives are uniform translation gears. The rotary motion is transferred from one shaft to a second through pos-itive transmission by gears.
In spur gears, the gears are mounted on parallel axles. The drive and the output shaft are arranged in parallel. Planetary gears are a type of spur gears, in which the drive and the output shafts are on the same axle.
The should be experimental unit can be used to study gear drives in the form of spur or planetary gears. The unit focuses on the consideration of kinematics.
The experimental unit consists of a base plate with a fixed axle, on which is mounted a pivoting rail.
Two other axles can be attached at any position on this rail.
Selecting and combing the gears with different numbers of teeth allows you to realise different transmission ratios and gear types.
The rail is locked in experiments with spur gears.
Depending on the aim of the experiment, one or two additional axles can be positioned on the rail.
The gears can be coupled to each other via driving pins or to the fixed axle. It is driven by hand.
The full revolutions are counted to determine the transmission ratio.
To investigate planetary gears, the rail is released and pivoted about the fixed axle.
The rail serves as a planetary wheel support on which the planetary wheels are positioned and represents the input of the gear. The sun wheel forms the output of the gear. It is driven by hand.
The transmission ratio can be determined by counting the full revolutions.
Learning objectives/experiments:
Investigation of single-stage or multistage spur gears
Investigation of planetary gears
Determine the transmission ratio
 
Technical Specifications:
Investigation of single-stage or multistage spur gears
Investigation of planetary gears
Driven by hand
Determine the transmission ratio by counting the revolutions of the driven gears
Base plate with storage for components
 
Technical data:
Gears
Quantity: 3-4
Plastic
Module: 1mm
Number of teeth: 40, 60, 80 and 100
LxWxH: 380x120x100mm
Scope of delivery:
Kinematic model: 1Pcs
Set of instructional material: 1Pcs
 
Warranty: 1 (One) year with services
ISO Certificate and Catalog should be submitted
Installation, Testing and Commissioning should be performed by the bidder and should be accepted by TIAC
 
The supplier shall provide comprehensive training to ensure that trainees are fully competent to operate the system independently.

Send Message

  • You can only upload 1 attachments at most
  • Supported formats: PDF,JPG,PNG,EXCEL,WORD,STP,IGS,DWG,DXF,PDF,STEP
  • The size of the uploaded file should not exceed 10MB
Service

Inquiry
Email
Phone
Wechat