Electronically controlled diesel engine trainer automotive engine training model educational equipment

GTAT-1002

Delivery:

EXW

minimum order:

1 set

Supply Ability:

30set / Month

Country of Origin:

Guangzhou,China

Stock Time:

45Day

Technical parameter
1. Dimensions: 1000x1500x1800mm; (L x W x H)
2. Battery: 12V/120AH
3. Fuel tank capacity: 10L
4. Coolant: Glycol

Quantity:

Request a Quote

The automotive training equipment electronically controlled diesel engine training model displays the basic principles and structures of electronically controlled diesel engine, and simulates its operation. This electronically controlled diesel engine training model automotive training equipment can be used to learn the basic knowledge, inspection work and other knowledge and skills of electrically controlled gasoline engine. The automotive training equipment engine training model is also suitable for the teaching and skills training of electronically controlled diesel engine in higher vocational colleges and secondary vocational colleges. At the same time, automotive training equipment engine training model can also be used as an educational equipment for skill training and skill appraisal in technical schools, vocational education centers, and vocational qualification appraisal stations.

Technical parameter

1. Dimensions: 1000x1500x1800mm; (L x W x H)

2. Battery: 12V/120AH

3. Fuel tank capacity: 10L

4. Coolant: Glycol

Product description

The trainer displays the basic principles and structures of electronically controlled diesel engine, and simulates its operation.

Product composition

Electronically controlled Diesel engine assembly	1PCS
ECU	1PCS
Dashboard	1PCS
Fault setting module(Manual switch type)	1PCS
Battery	1PCS
Test panel with circuit schematic	1PCS
OBD diagnostics seat	1PCS
Mobile stand	1PCS
Sensor signal meter	3PCS
Fire extinguisher	1PC

Main Features

1. This trainer can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.

2. Equipped with fault setting systems can simulate multiple failures in the real engine.

3. Equipped with voltmeter to show the real-time change of the sensors and actuators

4. Equipped with LED indicators to simulate the status of the injectors.

5. Equipped with a diagnostic socket, which can be connected to a scanner to read the fault codes and data stream of the engine control system

6. The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine electrical circuits directly.

7. There are test terminals mounted on the training panel, electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope etc. through the test terminals.

8. Equipped with ignition switches, relays, safety devices, safety shields, flywheels and other rotating parts shields.

9. Equipped with fault setting module: Manual switch type (Optional intelligent type).

Training courses

1. Introduction of main components;

2. Demonstration of engine operation, startup, acceleration, etc.;

3. Sensor and actuator signal measurement;

4. Operation of the scanner;

5. Fault set and troubleshooting;

6. Engine basic maintenance;

Suitable engine models listed below:

P.N.	Engine model
GTAT-1002-001	Bora TDI
GTAT-1002-002	Great wall 2.8TC CRDI
GTAT-1002-003	Great wall 4D20 CRDI 2.0 L
GTAT-1002-004	Isuzu 2.8TC CRDI
GTAT-1002-005	Jetta SDI

Recommend Products

Send Message