Automotive Training Equipment Educational Equipment Electrically Controlled Gasoline Engine Trainer

GTAT-1001

Delivery:

EXW

minimum order:

1 set

Supply Ability:

30set / Month

Country of Origin:

Guangzhou,China

Stock Time:

45Day

Technical parameter
Dimension: 1000x1500x1800mm; (L x W x H)
Battery: DC12V/60AH
Coolant: Glycol
Fuel tank: 10L

Quantity:

Request a Quote

The automotive training equipment electrically controlled gasoline engine training model displays the basic principles and structures of electrically controlled gasoline engine, and simulates its operation. This electrically controlled gasoline engine training model automotive training equipment can be used to learn the basic knowledge, inspection work and other knowledge and skills of electrically controlled gasoline engine. The automotive training equipment engine training model is also suitable for the teaching and skills training of electrically controlled gasoline engine in higher vocational colleges and secondary vocational colleges. Meanwhile, automotive training equipment engine training model can also be used as an educational equipment for skill training and skill appraisal in technical schools, vocational education centers, and vocational qualification appraisal stations.

Technical parameter

Dimension: 1000x1500x1800mm; (L x W x H)

Battery: DC12V/60AH

Coolant: Glycol

Fuel tank: 10L

Product description

This training bench shows the basic structure of the electronically controlled gasoline engine and simulates its operation.

Product composition

Gasoline engine assembly	1PCS
ECU	1 PCS
Dashboard	1PCS
Fault setting module(Manual switch type)	1PCS
Battery	1PCS
Test panel with circuit schematic	1PCS
OBD diagnostics seat	1PCS
Mobile stand	1PCS
Intake vacuum pressure gauge	1PCS
Fuel pressure gauge	1PCS
Sensor signal meter	4PCS
Fire extinguisher	1PCS

Main features

1. This trainer can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.

2. Equipped with fault setting module can simulate common faults in the real engine.

3. Equipped with voltmeter to show the real-time change of the sensors and actuators

4. Equipped with LED indicators to simulate the status of the injecting system.

5. Equipped with pressure gauges to display the pressure value and vacuum pressure value.

6. Equipped with diagnosis seat which supports to read the fault codes and data stream of the engine control system through the diagnosis seat.

7. The training panel is printed with a color circuit schematic diagram, so that students can directly view the diagram to analyze the faults of the engine circuit.

8. The panel is equipped with test terminals. The resistance, voltage, current, frequency, waveform and other electrical signals of sensors and actuators can be measured through the test terminals.

9. Equipped with power switch and flywheel guard.

10. Equipped with fault setting module: Manual switch type (Optional intelligent type).

Training courses

1. Introduction of main components;

2. Demonstration of engine operation, startup, acceleration, etc.;

3. Sensor and actuator signal measurement;

4. Operation of the scanner;

5. Fault set and troubleshooting;

6. Engine basic maintenance;

Suitable engine models listed below:

P.N.	Engine model	P.N.	Engine model
GTAT-1001-001	Jetta 1.6L	GTAT-1001-006	Magotan TSI
GTAT-1001-002	Santana AJR	GTAT-1001-007	Honda FIT
GTAT-1001-003	Passat 1.8T	GTAT-1001-008	Buick Excel
GTAT-1001-004	Toyota Corolla 2ZR-FE	GTAT-1001-009	Sagitar TSI 1.4
GTAT-1001-005	Toyota 1ZR-FE	GTAT-1001-010	Audi A6

Recommend Products

Send Message