The automotive training and teaching equipment engine and transmission trainer displays the basic principles and structures of electronically controlled gasoline engine with transmission, and simulates its operation. This automotive training and teaching equipment engine and transmission trainer can be used to learn the basic knowledge, inspection work and other knowledge and skills of electrically controlled gasoline engine and transmission. The automotive training and teaching equipment engine and transmission trainer is also suitable for the teaching and skills training of engine and transmission in higher vocational colleges and secondary vocational colleges. Meanwhile, automotive training and teaching equipment engine and transmission trainer can also be used as an educational equipment for skill training and skill appraisal in technical schools, vocational education centers, and vocational qualification appraisal stations.
 
Technical parameter
1.  Dimensions: 1000x1500x1800mm; (L x W x H)
2.  Battery: DC 12V/60AH
3.  Fuel tank:10L
4.  Coolant: Glycol
 
Product description
The trainer displays the basic principles and structures of electronically controlled gasoline engine with transmission, and simulates its operation.
 
Product composition
Gasoline engine assembly
1PCS
Transmission assembly
1PCS
ECU
1 PCS
Dashboard
1PCS
Fault set module (Manual switch type)
1PCS
Battery
1PCS
Test panel with circuit schematic
1PCS
OBD diagnostics seat
1PCS
Mobile stand
1PCS
Fuel pressure gauge
1PCS
Vacuum pressure gauge
1PCS
Sensor signal meter
4PCS
Main features
1. This trainer can simulate normal operation of the gasoline engine with transmission, ie. starting, idling, acceleration, deceleration, gear shift, fault detection and diagnosis, fault simulation, etc.
2. Equipped with fault simulation systems can simulate multiple failures in the real engine with transmission.
3. Equipped with voltmeter to show the real-time change of the sensors and actuators
4. Equipped with LED light to simulate the status of the injecting system and ignition system.
5. Equipped with pressure gauges to display the pressure value and vacuum pressure value.
6. Equipped with diagnosis seat which can use a scanner to read the fault codes and data flow of the engine and transmission control system through the diagnosis seat.
7. The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine and transmission control system directly.
8. There are test terminals mounted on the training panel. electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope through the test terminals.
9. Equipped with ignition switches, relays, safety devices, safety shields, flywheels and other rotating parts shields.
10. Fault setting module: Manual switch type (Optional intelligent type)
 
Training courses
1. Function introduction of main components of gasoline engine with transmission;
2. Demonstration of running, starting, accelerating, shifting, etc. of gasoline engine with transmission;
3. Sensor and actuator signal measurement;
4. Operation of the scanner;
5. Fault set and troubleshooting;
6. Engine and transmission basic maintenance;
 
Suitable engine models listed below:
P.N.
Engine model
P.N.
Engine model
GTAT-1005-001
Jetta 1.6L
(Manual transmission)
GTAT-1005-006
Magotan TSI
(Automatic transmission)
GTAT-1005-002
Santana AJR
(Manual transmission)
GTAT-1005-007
Honda FIT
(CVT transmission)
GTAT-1005-003
Passat 1.8T
(Automatic transmission)
GTAT-1005-008
Buick Excel
(Automatic transmission)
GTAT-1005-004
Toyota Corolla 2ZR-FE
(Automatic transmission)
GTAT-1005-009
Sagitar TSI 1.4
(Automatic transmission)
GTAT-1005-005
Toyota Vios 1ZR-FE
(Automatic transmission)
GTAT-1005-010
Chery A3
(Manual transmission)
 

Send Message

  • You can only upload 1 attachments at most
  • Supported formats: PDF,JPG,PNG,EXCEL,WORD,STP,IGS,DWG,DXF,PDF,STEP
  • The size of the uploaded file should not exceed 10MB