GT2025021204
Technical Parameters:
  • The device is designed to holistically demonstrate the structure and operation of the meter system.
  • The device applies to theoretical teaching and maintenance training of the meter system in secondary and senior vocational skill schools, normal education and training institutions.
  • Used a real and operable electronic meter system to illustrate the structure of the system.
  • Various sensors and switches should be connected to the meter system and should be operable to simulate operation of the signal source to demonstrate the operation of the meter system.
  • The training panel has the characteristics of corrosion resistance, impact resistance, pollution resistance, fireproof, and moisture proof. Its surface should be processed by special craft and spraying primer.
  • Never fade color circuit diagram and working principal diagram are painted on the board whose surface coating with varnish. The trainees can learn and analyze the working principle of the control system by referencing the diagram and the real object.
  • The training panel installed with detection terminals to detect electric signals, for example, resistance, voltage, current and frequency of circuit components of the electronic meter system.
  • Self-retention wheels installed and a 40cm² tabletop should be fixed on the base frame to place materials and light testing devices.
  • The training panel connected to a 220V AC voltage which should be changed to a 12V DC voltage through the internal circuit. The 12V DC voltage should protect the training panel against short circuit.
  • All of the language for this equipment should be in English.
  • Equipped with intelligent fault setting and appraisal system and should include fault setting, troubleshooting and assessment functions etc.
Technical Specifications:
  • The training panel made of advanced aluminum-plastic plate
  • Thickness of the plate: 4mm
  • The training panel's base frame is made of steel and the surface paint-coated
  • Size: 1600mm × 700mm ×1700mm (length x width x height)
  • External power supply: A.C. 220V ± 10% 50Hz
  • Operating voltage: 12V DC
  • Operating temperature: -40℃ to +50℃
  • The equipment should be provided with English user manual.
  • Manual contains the equipment introduction, operation method, fault setting and troubleshooting process.
The training system should be comprised the followings:
  • Detection control panel: With various detection terminals and a color circuit diagram - 1 Set
  • Ignition switch - 1 Unit
  • Dashboard - 1 Set
  • Combination switch - 1 Set
  • RPM simulation - 1 Set
  • Vehicle speed simulation - 1 Set
  • Fuel gauge sensor and simulation device - 1 Set
  • Simulated charging indicator light - 1 Set
  • Simulated oil pressure - 1 Set
  • Steering indicator light switch - 1 Set
  • High beam indicator light switch - 1 Set
  • Fuses - 1 Set
  • Tablet PC - 1 Unit
  • Intelligent fault-setting and appraisal system - 1 Set
  • Movable framework (with self-retention wheels): 1600mm x 700mm x 1700mm (length x width x height) - 1 Set

Send Message

  • You can only upload 1 attachments at most
  • Supported formats: PDF,JPG,PNG,EXCEL,WORD,STP,IGS,DWG,DXF,PDF,STEP
  • The size of the uploaded file should not exceed 10MB
Service

Inquiry
Email
Phone
Wechat