automotive training and teaching equipment

Automotive training equipment diesel engine and transmission trainer

GTAT-1005A

Delivery:

EXW

minimum order:

1 set

Supply Ability:

30set / Month

Country of Origin:

Guangzhou,China

Stock Time:

45Day

Technical parameter
1. Dimensions: 1000x1650x1800mm; (L x W x H)
2. Battery: DC 12V/120AH
3. Fuel tank:10L
4. Coolant: Glycol

Quantity:

Request a Quote

The automotive training and teaching equipment engine and transmission trainer displays the basic principles and structures of electronically controlled diesel engine with transmission, and simulates its operation. This automotive training and teaching equipment engine and transmission trainer can be used to learn the basic knowledge, inspection work and other knowledge and skills of electrically controlled gasoline engine and transmission. The automotive training and teaching equipment engine and transmission trainer is also suitable for the teaching and skills training of engine and transmission in higher vocational colleges and secondary vocational colleges. Meanwhile, automotive training and teaching equipment engine and transmission trainer can also be used as an educational equipment for skill training and skill appraisal in technical schools, vocational education centers, and vocational qualification appraisal stations.

Technical parameter

1. Dimensions: 1000x1650x1800mm; (L x W x H)

2. Battery: DC 12V/120AH

3. Fuel tank:10L

4. Coolant: Glycol

Product description

The trainer displays the basic principles and structures of diesel engine with transmission, and simulates its operation.

Product composition

Diesel engine assembly	1PCS
Transmission assembly	1PCS
Dashboard	1PCS
Fault set module (Manual switch type)	1PCS
Battery	1PCS
Test panel with circuit schematic	1PCS
Mobile stand	1PCS
Vacuum pressure gauge	1PCS
Sensor signal meter	4PCS

Main features

1. This trainer can simulate normal operation of the diesel engine with transmission, ie. starting, idling, acceleration, deceleration, gear shift, fault detection and diagnosis, fault simulation, etc.

2. Equipped with fault set module which can simulate multiple failures in the real engine with transmission.

3. Equipped with voltmeter to show the real-time change of the sensors and actuators

4. Equipped with LED light to simulate the status of the injecting system.

5. Equipped with pressure gauges to display the pressure value and vacuum pressure value.

6. The diesel engine which is electronically controlled is equipped with diagnosis seat which can use a scanner to read the fault codes and data flow of the engine and transmission control system through the diagnosis seat.

7. The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine and transmission control system directly.

8. There are test terminals mounted on the training panel. electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope through the test terminals.

9. Equipped with ignition switches, relays, safety devices, safety shields, flywheels and other rotating parts shields.

10. Fault setting module: Manual switch type (Optional intelligent type)

Training courses

1. Function introduction of main components of diesel engine with transmission;

2. Demonstration of running, starting, accelerating, shifting, etc. of diesel engine with transmission;

3. Sensor and actuator signal measurement;

4. Operation of the scanner;

5. Fault set and troubleshooting;

6. Engine and transmission basic maintenance;

Suitable engine models listed below:

P.N.	Engine model
GTAT-1005A-001	Isuzu 4JB1 2.8T CRDI (Manual transmission)
GTAT-1005A-002	Great wall 4D20 CRDI (Automatic transmission)
GTAT-1005A-003	HYUNDAI TERRACAN CRDI (Automatic transmission)

Recommend Products

Send Message