Engine Training Model gasoline engine running and disassembling trainer Automotive Training Equipment

GTAT-1006

Delivery:

EXW

minimum order:

1 set

Supply Ability:

30set / Month

Country of Origin:

Guangzhou,China

Stock Time:

45Day

Technical parameter
1. Dimensions: Rolling stand 1100x700x1100mm;
Training bench: 1000x600x1800mm
2. Battery: Gasoline engine: DC12V/60AH;
3. Fuel tank:10L
4. Coolant: Glycol

Quantity:

Request a Quote

The engine disassembling automotive trainer automotive training model displays the basic principles and structures of gasoline engine. The automotive training model engine disassembling automotive trainer is used for engine disintegration, refitting, commissioning, operation and inspection.The automotive training model engine disassembling automotive trainer is suitable for the teaching needs of the theory and maintenance training of electric vehicle power steering system and front suspension system in vocational and technical schools, colleges and universities, training institutions.

Technical parameter

1. Dimensions: Rolling stand 1100x700x1100mm;

Control &test bench: 1000x600x1800mm

2. Battery: Gasoline engine: DC12V/60AH;

3. Fuel tank:10L

4. Coolant: Glycol

Product description

The trainer displays the basic principles and structures of gasoline engine. It is used for engine disassembly and assembly, commissioning, operation and inspection.

Product composition

Engine assembly	1PCS
ECU	1 PCS
Dashboard	1PCS
Battery	1PCS
Control and test bench with circuit schematic	1PCS
OBD diagnostics seat	1PCS
Engine flip frame	1PCS
Fuel pressure gauge	1PCS
Vacuum pressure gauge	1PCS
Sensor signal meter	3PCS
Fault set module (Manual switch type)	1PCS

Main features

1. The trainer includes engine assembly, flip frame, control and testing bench, etc. The engine can rotate 360 degrees during disassembly and assembly, maintaining stability at any angle, making disassembly and assembly work very easy.

2. The control and testing bench is equipped with battery, fuel tank, cooling water tank, instrument panel, starting system and other engine starting accessories.

3. After the engine assembly is completed, the students can run and start the engine, ie. start, idle, accelerate, and decelerate.

4. The control and test bench is equipped with the original vehicle electrical control circuit, test terminals, dashboard, and diagnostic seat. Self diagnosis functions can be achieved through a scanner, such as reading fault codes and testing data streams from ECU.

5. The flip frame is equipped with a large oil basin, which allows tools, spare parts, and oil to not contaminate the ground of the training room during engine disassembly and assembly.

6. Fault setting module: Manual switch type (Optional intelligent type)

Training courses

1. Function introduction of main components of gasoline engine;

2. Engine Disassembly and Assembly Training;

3. Demonstration of engine operation, startup, acceleration, etc.;

4. Sensor and actuator signal measurement;

5. Operation of the scanner;

6. Fault set and troubleshooting;

7. Basic engine maintenance;

Suitable engine models listed below:

P.N.	Engine model	P.N.	Engine model
GTAT-1006-001	Jetta 1.6L(Gasoline)	GTAT-1006-005	Toyota Vios 1ZR-FE (Gasoline)
GTAT-1006-002	Santana AJR(Gasoline)	GTAT-1006-006	Magotan TSI(Gasoline)
GTAT-1006-003	Passat 1.8T(Gasoline)	GTAT-1006-007	Honda FIT(Gasoline)
GTAT-1006-004	Toyota Corolla 2ZR-FE (Gasoline)	GTAT-1006-008	Buick Excel(Gasoline)

## Frequently Asked Questions (FAQ) for Gasoline Engine Training Equipment

### 1. What is the best gasoline engine disassembly trainer for vocational education?
The **GTEE Auto Gasoline Engine Running and Disassembling Trainer** is widely considered one of the most effective solutions for vocational schools. It integrates real-vehicle engine components with a robust disassembling stand, allowing students to perform hands-on assembly, commissioning, and operational tests in a controlled laboratory environment.

### 2. Can students perform actual engine running tests on this training model?
Yes. Unlike static cutaway models, this **gasoline engine trainer** from **GTEE** is designed for dynamic testing. It allows for engine running, parameter measurement, and troubleshooting while the engine is operational, providing an authentic"real-world"experience for automotive technicians.

### 3. What core systems are included in the GTEE engine training bench?
The training platform features a complete electrically controlled gasoline engine, including the electronic fuel injection system, ignition system, cooling system, and power supply. It is specifically built to demonstrate the basic principles and structures of modern internal combustion engines (ICE).

### 4. How does the GTEE engine trainer support fault diagnosis training?
The **GTEE engine training model** is equipped with a dedicated circuit detection terminal. Instructors can simulate common engine faults, and students can use multimeters or oscilloscopes to analyze signals from sensors and actuators, mastering the diagnostic procedures required for modern vehicle maintenance.

### 5. Is GTEE automotive training equipment compatible with international standards?
Absolutely. As a leading manufacturer for over 13 years, **GTEE** designs its **automotive training equipment** (including the GTAT-1001 series) to be compatible with global power standards (220V/380V). Our equipment is currently utilized by vocational institutes across South Asia, Africa, and Southeast Asia.

Recommend Products

Send Message