Auto diesel engine running and disassembling trainer automotive training equipment

GTAT-1006A

Delivery:

EXW

minimum order:

1 set

Supply Ability:

30set / Month

Country of Origin:

Guangzhou,China

Stock Time:

45Day

Technical parameter
1. Dimensions: Rolling stand 1100x700x1100mm;
Training bench: 1000x600x1800mm
2. Battery: DC12V/120AH
3. Fuel tank:10L
4. Coolant: Glycol

Quantity:

Request a Quote

The auto diesel engine disassembling automotive trainer automotive training model displays the basic principles and structures of diesel engine. The automotive training model engine disassembling automotive trainer is used for diesel engine disintegration, refitting, commissioning, operation and inspection.The automotive training model engine disassembling automotive trainer is suitable for the teaching needs of the theory and maintenance training of electric vehicle power steering system and front suspension system in vocational and technical schools, colleges and universities, training institutions.

Technical parameter

1. Dimensions: Rolling stand 1100x700x1100mm;

Control &test bench: 1000x600x1800mm

2. Battery: DC12V/120AH

3. Fuel tank:10L

4. Coolant: Glycol

Product description

The automotive trainer displays the basic principles and structures of diesel engine. The automotive training model is used for engine disassembly and assembly, commissioning, operation and inspection.

Product composition

Engine assembly	1PCS
Dashboard	1PCS
Battery	1PCS
Control and test bench with circuit schematic	1PCS
Engine flip frame	1PCS
Fuel pressure gauge	1PCS
Vacuum pressure gauge	1PCS
Sensor signal meter	3PCS
Fault set module (Manual switch type)	1SET

Main features

1. The trainer includes engine assembly, flip frame, control and testing bench, etc. The engine can rotate 360 degrees during disassembly and assembly, maintaining stability at any angle, making disassembly and assembly work very easy.

2. The control and testing bench is equipped with battery, fuel tank, cooling water tank, instrument panel, starting system and other engine starting accessories.

3. After the engine assembly is completed, the students can run and start the engine, ie. start, idle, accelerate, and decelerate.

4. The control and test bench is equipped with the original vehicle electrical control circuit, test terminals, dashboard, etc.

5. The flip frame is equipped with a large oil basin, which allows tools, spare parts, and oil to not contaminate the ground of the training room during engine disassembly and assembly.

6. Fault setting module: Manual switch type (Optional intelligent type)

Training courses

1. Function introduction of main components of diesel engine;

2. Engine Disassembly and Assembly Training

3. Demonstration of engine operation, startup, acceleration, etc.;

4. Sensor and actuator signal measurement;

5. Fault set and troubleshooting;

6. Basic engine maintenance;

Suitable engine models listed below:

P.N.	Engine model
GTAT-1006A-001	JMC CB10(Diesel)
GTAT-1006A-002	Great wall 2.8TC(Diesel) (High pressure common rail)
GTAT-1006A-003	Isuzu 2.8TC(Diesel) (High pressure common rail)

Recommend Products

Send Message