Electric drive and automation training device
GTET-1002
Technical parameter
Dimension : About 1670mm×760mm×1730mm
Power supply : Three-phase,AC~380V/50Hz
Weight : about 200kg
Dimension : About 1670mm×760mm×1730mm
Power supply : Three-phase,AC~380V/50Hz
Weight : about 200kg
Delivery
EXW
minimum order
1 set
Supply Ability
30set / Month
Country of Origin
China
Stock Time
45Day
Quantity
This electric device automation training device is suitable for subjects training of electrician, electrical, electrical control technology, electric drive control circuit and skills, electronic training and related experimental and educational subjects. The automation training vocational training equipment is a useful vocational training equipment in electric device automation training. The vocational training equipment is also suitable for the teaching and skills training of related automation training majors in higher vocational colleges and secondary vocational colleges. At the same time, the electric device automation training device can also be used as an assessment device for skill training and skill appraisal in technical schools, vocational education centers, and vocational qualification appraisal stations.
Technical parameter
Dimension : About 1670mm×760mm×1730mm
Power supply : Three-phase,AC~380V/50Hz
Weight : about 200kg
Product composition
No. | Name | Specification | QTY |
1 | Training bench | 1 | |
2 | Experimental table | 1 | |
3 | Component box | DG04 | 1 |
4 | Relay control experiment hanging box 1 | DT01 | 1 |
5 | Relay control experiment hanging box 2 | DT02 | 1 |
6 | PLC/Frequency converter hanging box | PLC01 | 1 |
7 | Touch screen hanging box | CMP01 | 1 |
8 | PLC module 1 | PLC02 | 1 |
9 | PLC module 2 | PLC03 | 1 |
10 | PLC module 3 | PLC04 | 1 |
11 | PLC Programming Line | 1 | |
12 | Needle-nose pliers | 1 | |
13 | Screwdriver | 1 | |
14 | Self-locking wire | 50 | |
15 | Pistol plug wire | 50CM | 16 |
16 | Pistol plug wire | 80CM | 10 |
17 | Watt-hour meter | 1 | |
18 | Single - Chip Microcomputer experimental box | 1 | |
19 | Velocimeter | 1 | |
20 | Touch Screen Printer Line | 1 | |
21 | Former deputy coil | 1 | |
22 | IC Fittings | 1 | |
23 | Motor (with Centrifugal switch) | 1 | |
24 | Motor | 1 |
Training courses
Part 1: Electric drive:
1: Three phase asynchronous motor point and self lock control
2: Three phase asynchronous motor reversing control
3: Sequence control
4: Control at two positions
5: Three phase squirrel cage induction motor reduced voltage starting
6: Three phase asynchronous motor brake control
7: Electrical control of lathe C620
Part 2: PLC/inverter/touch screen
1: Programming Practice of Basic Instruction.
(I) And or Invert Logic Function Experiment
(II)Timer/Counter Function Experiment
2: Simulation of Water Level Simulation Control of Water Tower
3: Control Simulation of Light of Sky Tower
4: Simulation of Automatic Loading Control
5: Simulation of Liquid Mix Device Simulation Control.
6: Simulation of Crossroad Traffic Light.
7: Automatic Control Forming Machine Simulation Control
8: Simulation of Mail Sorting Machine Simulation Control
9: Simulation of Full-Automatic Washing Machine Control
10: Simulation of Electroplating Production Line Control.
11: LED Digital Display Control.
12: Simulation of Manipulator Action.
13: Simulation of Five-phase Step Motor Control
14: Simulation of Assembly Line Control
15: Simulation of Four Section Conveyor Belt
16: Simulation of Rolling Mill Simulation Control.
17: PLC reversing control of Three-phase Asynchronous Motor
18: PLC Y-△Start Control of Three-phase Asynchronous Motor
SEND MESSAGE