Engine test stand 11kW
GTAT-T002
Delivery:
EXW
minimum order:
1 set
Supply Ability:
30set / Month
Country of Origin:
Guangzhou,China
Stock Time:
45Day
Technical parameter
1.Dimension:test stand: 1270x850x1670mm approx.
brake unit: 1270x1050x1120mm approx.
2.Intake air quietening vessel, 80L
3.Power supply：three-phase 380V/AC, single-phase 220V/AC;
4.Measuring ranges
- Torque: -100-100Nm
- Speed: 0-5000rpm
- Intake air using differential pressure: 30-250L/h
5.Temperatures: 0-120°C, exhaust gas: 0-900°C
6.Fuel consumption: 0-120cm³/min
7.Cooling water flow rate: engine: 0-600L/h
8.Oil pressure: 0-6bar
1.Dimension:test stand: 1270x850x1670mm approx.
brake unit: 1270x1050x1120mm approx.
2.Intake air quietening vessel, 80L
3.Power supply：three-phase 380V/AC, single-phase 220V/AC;
4.Measuring ranges
- Torque: -100-100Nm
- Speed: 0-5000rpm
- Intake air using differential pressure: 30-250L/h
5.Temperatures: 0-120°C, exhaust gas: 0-900°C
6.Fuel consumption: 0-120cm³/min
7.Cooling water flow rate: engine: 0-600L/h
8.Oil pressure: 0-6bar
Quantity:
This vocational training equipment engine test bench can be used to learn the basic knowledge and other knowledge and skills of engine testing. The engine test stand vocational training equipment is also suitable for the teaching and skills training of related majors of engine test bench in higher vocational colleges and secondary vocational colleges. At the same time, the vocational training equipment engine test bench can also be used as an assessment device for skill training and skill appraisal in technical schools, vocational education centers, and vocational qualification appraisal stations.
Main features
1.Test stand for holding prepared single cylinder engines (four-stroke) with a maximum power output of 11kW
2. This stand can test the engine modules GTAT-T013;
3.Power transmission from tested engine module to the test stand unit via elastic coupling
4.Brake speed can be continuously adjusted
5.Measurement and display of temperatures (oil, fuel, air), engine load, speed, fuel consumption, air intake quantity, oil pressure
6.Fuel supply tanks for 2 different fuels: gasoline and diesel.
Technical parameter
1.Dimension: Control stand: 1300x850x1800mm.
Test bench: 1300x1100x1150mm.
2.Intake air quietening vessel, 80L
3.Power supply：three-phase 380V/AC, single-phase 220V/AC;
4.Measuring ranges
- Torque: -100-100Nm
- Speed: 0-5000rpm
- Intake air using differential pressure: 30-250L/h
5.Temperatures: 0-120°C, exhaust gas: 0-900°C
6.Fuel consumption: 0-120cm³/min
7.Cooling water flow rate: engine: 0-600L/h
8.Oil pressure: 0-6bar
Product composition
Control stand | 1pcs |
Test bench | 1pcs |
Recommend Products
Engine test bed engine Eddy current dynamometer automotive engine testing modelGTAT-T016Send Inquiry
Engine dynamometer engine run-in standGTAT-T015Send Inquiry
Engine eddy current dynamometer engine test bench engine test standGTAT-T014Send Inquiry
Engine test stand for single cylinder engines, 3kWTechnical parameter 1.Test stand: 930 x 860 x 1850 mm approx. 2. Brake unit: 980 x 850 x 1100 mm approx. 3.Measuring ranges: -Ambient temperature：0-100°C - Fuel temperature：0-100°C - Air consumption：30-333L/min - Fuel consumption：0-50cm3/min 4.Power supply：three-phase 380V/AC, single-phase 220V/AC;GTAT-T001Send Inquiry
Send Message