This vocational training equipment pneumatic device can be used as the comprehensive test-bench of the mechanical, electrical and pneumatic transmission. Students can get more accurate understanding of the structure of pneumatic components, pneumatic control loop theory and design methods through operation on the pneumatic training equipment. This pneumatic training equipment can be used to learn the basic knowledge, process preparation, processing and assembling, inspection work and other knowledge and skills of pneumatic device. The vocational training equipment pneumatic device is also suitable for the teaching and skills training of related majors in higher vocational colleges and secondary vocational colleges. At the same time, the vocational training equipment pneumatic training equipment can also be used as an assessment device for skill training and skill appraisal in technical schools, vocational education centers, and vocational qualification appraisal stations.
 
Technical parameter
Dimension: 1500mm × 650mm × 1750mm
Power supply: Single phase AC220V, 50Hz
Weight: about 150kg
 
Product description
This device can be used as the comprehensive test-bench of the mechanical, electrical and  
pneumatic transmission. Students can get more accurate understanding of the structure of pneumatic components, pneumatic control loop theory and design methods through operation.
 
Product composition
No.
Name
Spec
QTY
1
Air compressor
10L, 0.7Mpa 
1 pcs
2
Experimental bench
 
1 pcs
3
Components installation panel
Relay control unit, Signal input unit,
1 pcs
4
Single-acting cylinder
MSAX25×100-CA
1 pcs
5
Dual-acting cylinder
MAX25×100-CA
2 pcs
6
Oil-water separator
AC2000 Triple pieces
1 pcs
7
Reducing valve (with pressure gauge)
AR2000
1 pcs
8
5/2 Handle shuttle valve
4H210-08
1 pcs
9
5/2 Single solenoid shuttle valve
4V210-08(DC24V)
2 pcs
10
5/2 Double solenoid shuttle valve
4V220-08(DC24V)
1 pcs
11
5/3 Double solenoid shuttle valve
4V230-08(DC24V)
1 pcs
12
5/2 Single pneumatic control 
4A210-08
2 pcs
13
5/2 Double pneumatic control 
4A220-08
2 pcs
14
2/2 knob valve
MOV-02
1 pcs
15
2/2 button valve
MOV-03A
1 pcs
16
“OR” gate shuttle valve
ST-08
2 pcs
17
Quick exhaust valve
QV-08
2 pcs
18
One-way throttle valve
KLA-08
2 pcs
19
One-way throttle valve(install on the cylinder)
JSC601
7 pcs
20
One-way valve
1/4
2 pcs
21
Sequence valve
Designed and made
2 pcs
22
Air capacitor
Designed and made
1 pcs
23
Six-way valve
Designed and made
2 pcs
24
Magnetic switch
Designed and made
4 pcs
25
Tools
 
1 set
26
Accessories
 
1 set
27
Accessories
 
1 set
 
Training courses
  1. The reversing loop of single acting cylinder
  2. The reversing loop of double acting cylinder
  3. Single acting cylinder speed control loop
  4. Single phase speed control loop of double acting cylinder
  5. Double acting cylinder speed control loop
  6. Speed switching loop
  7. Buffer loop
  8. Secondary pressure control loop
  9. Counting loop
  10. Delay loop
  11. Interlocking loop
  12. Single cylinder and single reciprocating control loop
  13. Single cylinder continuous reciprocating action loop
  14. Sequential action loop of a straight cylinder and a rotating cylinder
  15. Multi cylinder sequential working loop
  16. Double cylinder synchronous action loop
  17. Four cylinder linkage loop
  18. Unloading loop
  19. The application loop of the “OR” gate shuttle valve
  20. The application loop of the fast exhaust valve
  21. High and low voltage switch over control loop
  22. Overloading protection loop

Send Message

  • You can only upload 1 attachments at most
  • Supported formats: PDF,JPG,PNG,EXCEL,WORD,STP,IGS,DWG,DXF,PDF,STEP
  • The size of the uploaded file should not exceed 10MB
Service

Inquiry
Email
Phone
Wechat