Technical parameter
Combustion chamber carbon deposition cleaning machine
Size: 44*33*29
1) Before cleaning, add combustion carbon deposition cleaning agent to the combustion chamber carbon deposition cleaning machine, adding 1 bottle each time.
2) Disassemble the spark plugs of each cylinder, and use the combustion chamber carbon deposit cleaning machine to spray foam or carbon deposit cleaning agent from the spark plug hole until the foam overflows the hole.
3) After soaking for 5-8 minutes, use the oil suction probe of the combustion chamber carbon deposit cleaning machine to absorb the cleaning agent and dissolved carbon deposits, and then blow them thoroughly with an air gun. It is best to use kerosene or other solvent oil to wash once to maintain the lubricity inside the engine.
4) Install the spark plug back, start the engine, and keep the speed at 1200 rpm for about 2-5 minutes to complete the cleaning of the intake valve and the carbon deposit in the combustion chamber.

Send Message

  • You can only upload 1 attachments at most
  • Supported formats: PDF,JPG,PNG,EXCEL,WORD,STP,IGS,DWG,DXF,PDF,STEP
  • The size of the uploaded file should not exceed 10MB
Service

Inquiry
Email
Phone
Wechat