Auto air conditioning trainer Automobile Training Equipment Educational Equipment

GTAT-2001

Delivery:

EXW

minimum order:

1 set

Supply Ability:

30set / Month

Country of Origin:

Guangzhou,China

Stock Time:

45Day

Technical parameter
1. Dimensions: 1000x1600x1800mm（L x W x H）
2. Power supply: AC 220V/50Hz
3. Refrigerant: R134a
4. Refrigerant pressure: low pressure: 0.15-0.35Mpa; high pressure: 1.5-2.0Mpa

Quantity:

Request a Quote

The automotive training equipment automobile air conditioning teaching equipment adopts original auto air conditioning system and uses motor to simulate the engine drive the air conditioning system. The automotive training equipment automobile air conditioning teaching equipment can really show the structure and working principle of the auto air conditioning system.

Technical parameter

1. Dimensions: 1000x1600x1800mm (L x W x H）

2. Power supply: AC 220V/50Hz

3. Refrigerant: R134a

4. Refrigerant pressure: low pressure: 0.15-0.35Mpa; high pressure: 1.5-2.0Mpa

Product description

The trainer adopts original automotive air conditioning system and uses motor to simulate the engine drive the air conditioning system. It can really show the structure and working principle of the automotive air conditioning system.

Product composition

Mobile stand with test panel	1 SET
Ignition switch	1 PCS
High/low pressure gauge	1 SET
Air conditioning controller	1 SET
Evaporator assembly	1 SET
Air compressor	1 PCS
Expansion valve	1 PCS
Dryer	1 PCS
Blower	1 PCS
Condenser	1 SET
Drive motor	1 PCS
Cooling electronic fan	1 PCS
Fault set module(Manual switch type)	1 SET

Main features

1. This trainer adopts original automotive air conditioning system, fully demonstrating the composition and structure of the air conditioning system;

2. This trainer uses AC motor driven air conditioning compressor to work. By operating the air conditioning control panel, the working process of the car air conditioning system can be truly demonstrated;

3. The panel of this trainer is painted with air conditioning circuit diagrams and schematic diagrams. Students can visually compare the circuit diagrams and physical objects to understand and analyze the working principle of the manual air conditioning system in automobiles;

4. There are test terminals installed on the panel of this trainer, which can test the electrical signals such as resistance, voltage, and current of various circuit components in the air conditioning system;

5. Students can undergo practical training such as refrigerant filling and leak detection.

6. Equipped with fault setting module: manual switch type (optional intelligent type)

Training courses

1. Function introduction of main components of the auto air conditioning system;

2. Demonstration of the work principle and process of the auto air conditioning system;

3. Measurement of the signals of the sensors and actuators;

4. Practical exercise of vacuum pumping, refrigerant filling, refrigerant leak detection, etc;

5. Fault setting and troubleshooting

Suitable car models listed below

P.N.	Car model	P.N.	Car model
GTAT-2001-001	Jetta 1.6L(Manual)	GTAT-2001-004	Passat B5(Automatic)
GTAT-2001-002	Santana 2000(Manual)	GTAT-2001-005	Lexus LS400(Automatic)
GTAT-2001-003	Toyota Vios(Manual)	GTAT-2001-006	Toyota Corolla1.8L(Automatic)

Recommend Products

Send Message